5 Discussion and Conclusion 5.1 Conclusion
5.3 Scope for Future work
For future works, the research can be extended with a detailed study on developing a workflow for specific methods of DfAM such as Part Consolidation, Topology optimiza-tion, Lattice structures, and Multi-Material design. The study can be further narrowed down by choosing a software platform and understanding the workflow and developing best practices. The research output can be presented as a database of guidelines and workflow which will be a support for the mechanical designer to design for Additive Manufacturing.
References
3Dprinting, M. a G. : (2018). Modeling a Gyroid : 3Dprinting.
https://www.reddit.com/r/3Dprinting/comments/858ypy/modeling_a_gyroid/
Adam, G. A. O., & Zimmer, D. (2014). Design for Additive Manufacturing-Element transitions and aggregated structures. CIRP Journal of Manufacturing Science and Technology, 7(1), 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001
Ansys, I. (2006). Heat Transfer Modeling.
https://www.academia.edu/3196299/ANSYS_Fluent_-_Heat_Transfer_Modeling Ansys, I. (2016). ANSYS AIM Simulation for Every Engineer.
https://www.ansys.com/-/media/ansys/corporate/resourcelibrary/brochure/ansys-aim-brochure.pdf
Antony, J. (2011). Six Sigma vs Lean: Some perspectives from leading academics and practitioners. International Journal of Productivity and Performance Management, 60(2), 185–190. https://doi.org/10.1108/17410401111101494
Asad, U., Chakrabarty, A., & Chuan, T. K. (2006). Comparative Study of DFSS in Product and Service Innovation. Asian Network for Quality Congress.
https://eprints.qut.edu.au/47097/1/Comparative_Study_of_DFSS_in_Product_an d_Service_Innovations.pdf
Bahman, A. S., & Iannuzzo, F. (2018). Computer-aided engineering simulations. In Wide Bandgap Power Semiconductor Packaging (pp. 199–223). Elsevier.
https://doi.org/10.1016/B978-0-08-102094-4.00010-4
Balubaid, M., & Alamoudi, R. (2015). Application of the Analytical Hierarchy Process (AHP) to Multi-Criteria Analysis for Contractor Selection. American Journal of Industrial
and Business Management, 05(09), 581–589.
https://doi.org/10.4236/ajibm.2015.59058
Bäßler, R. (2018). Review: Additive manufacturing of metals – From fundamental technology to rocket nozzles, medical implants, and custom jewelry. In Materials and Corrosion. https://doi.org/10.1002/maco.201870124
Bauelas, R., & Antony, J. (2004). Six sigma or design for six sigma? TQM Magazine, 16(4), 250–263. https://doi.org/10.1108/09544780410541909
Bell, E., Bryman, A., & Harley, B. (2018). Business research methods. Oxford university
press.
Bendsoe, M. P., & Sigmund, O. (2013). Topology optimization: theory, methods, and applications. Springer Science & Business Media.
Bikas, H., Lianos, A. K., & Stavropoulos, P. (2019). A design framework for additive manufacturing. International Journal of Advanced Manufacturing Technology, 103(9–12), 3769–3783. https://doi.org/10.1007/s00170-019-03627-z
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016). Additive manufacturing methods and modeling approaches: A critical review. International Journal of Advanced Manufacturing Technology, 83(1–4), 389–405. https://doi.org/10.1007/s00170-015-7576-2
Bilalis, D. N. (2000). COMPUTER AIDED DESIGN-CAD.
http://dl.icdst.org/pdfs/files/ed22bd8e464c6ad75ff352f0d14f83c6.pdf
Bonatti, C., & Mohr, D. (2019). Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments.
Journal of the Mechanics and Physics of Solids, 122, 1–26.
https://doi.org/10.1016/j.jmps.2018.08.022
Boyard, N., Rivette, M., Christmann, O., & Richir, S. (2014a). A design methodology for parts using Additive Manufacturing. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013, 399–404.
https://doi.org/10.1201/b15961-74
Boyard, N., Rivette, M., Christmann, O., & Richir, S. (2014b). A design methodology for parts using Additive Manufacturing. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013, 399–404.
https://doi.org/10.1201/b15961-74
Brue, G., & Launsby, R. (2003). Design for Six Sigma. McGraw-Hill Education.
https://books.google.com/books?id=Ao9j1KChMgYC
Bryman, A. (2016). Social research methods. Oxford university press.
Burge, S., & Churchill, W. (2009). The Systems Engineering Tool Box “Give us the tools and
we will finish the job.”
Camba, J. D., Contero, M., & Company, P. (2016). Computer-Aided Design Parametric CAD modeling : An analysis of strategies for design reusability. Computer-Aided Design, 74, 18–31. https://doi.org/10.1016/j.cad.2016.01.003
Chang, K.-H. (2014). Design Theory and Methods Using CAD/CAE : The Computer Aided Engineering Design Series. Elsevier Science & Technology.
http://ebookcentral.proquest.com/lib/tritonia-ebooks/detail.action?docID=1813980
Charles, A., Elkaseer, A., Thijs, L., Hagenmeyer, V., & Scholz, S. (2019). Effect of process parameters on the generated surface roughness of down-facing surfaces in selective laser melting. Applied Sciences (Switzerland), 9(6), 1–13.
https://doi.org/10.3390/app9061256
Chua, C. K., Wong, C. H., & Yeong, W. Y. (2017a). Chapter Four - Software and Data Format (C. K. Chua, C. H. Wong, & W. Y. B. T.-S. Yeong Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing (eds.); pp. 75–94). Academic Press. https://doi.org/https://doi.org/10.1016/B978-0-12-813489-4.00004-0 Chua, C. K., Wong, C. H., & Yeong, W. Y. (2017b). Chapter Four - Software and Data Format
(C. K. Chua, C. H. Wong, & W. Y. B. T.-S. Yeong Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing (eds.); pp. 75–94). Academic Press. https://doi.org/https://doi.org/10.1016/B978-0-12-813489-4.00004-0 Cooper, R. G., & Kleinschmidt, E. J. (2007). Winning businesses in product development:
The critical success factors. Research Technology Management, 50(3), 52–66.
https://doi.org/10.1080/08956308.2007.11657441
Crowell, A. R., Miller, B. A., & McNamara, J. J. (2014). Robust and efficient treatment of temperature feedback in fluid–thermal–structural analysis. AIAA Journal, 52(11), 2395–2413.
Cudney, E. A., & Furterer, S. L. (2016). Design for Six Sigma in Product and Service Development. In E. A. Cudney & S. L. Furterer (Eds.), Design for Six Sigma in Product and Service Development. CRC Press. https://doi.org/10.1201/b12090
Dancel, R. (2019). Case Study Paper on Additive Manufacturing ( 3D Printing Technology ).
Philosophy of Technology, April. https://doi.org/10.13140/RG.2.2.32535.21924 Dechaumphai, P., Thornton, E. A., & Wieting, A. R. (1989). Flow-thermal-structural study
of aerodynamically heated leading edges. Journal of Spacecraft and Rockets, 26(4), 201–209.
Dekier, Ł. (2012). Th e Origins and Evolution of Lean Management System. Journal of International Studies, 5(1), 46–51. https://watermark.silverchair.com/55-1-49.pdf?token=AQECAHi208BE49Ooan9kkhW_Ercy7Dm3ZL_9Cf3qfKAc485ysgAAA systems using neutral formats. Proceedings in Manufacturing Systems, 6(3).
Dong, L., Fang, Y., Lin, W., & Seah, H. S. (2015). Perceptual Quality Assessment for 3D Triangle Mesh Based on Curvature. IEEE Transactions on Multimedia, 17(12), 2174–
2184. https://doi.org/10.1109/TMM.2015.2484221
Dorfman, A. S. (2010). Conjugate Problems in Convective Heat Transfer. Taylor and Francis Group, LLC.
Doubrovski, E. L., Verlinden, J. C., & Horvath, I. (2012). First steps towards collaboratively edited design for additive manufacturing knowledge. 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012, 891–901.
Du, W. (2017). Imece2017-70344 Binder Jetting Additive Manufacturing of Ceramics : a Literature. 1–12.
Fong, P. S. W., & Choi, S. K. Y. (2000). Final contractor selection using the analytical hierarchy process. Construction Management and Economics, 18(5), 547–557.
https://doi.org/10.1080/014461900407356
Furukawa, Y., & Yamauchi, S. (2018a). Technologies of a cooling device for power semiconductor. In Wide Bandgap Power Semiconductor Packaging: Materials,
Components, and Reliability (pp. 111–126). Elsevier. https://doi.org/10.1016/B978-0-08-102094-4.00007-4
Furukawa, Y., & Yamauchi, S. (2018b). Technologies of a cooling device for power semiconductor. In Wide Bandgap Power Semiconductor Packaging: Materials, Components, and Reliability (pp. 111–126). Elsevier. https://doi.org/10.1016/B978-0-08-102094-4.00007-4
Gardan, J. (2016). Additive manufacturing technologies: State of the art and trends.
International Journal of Production Research, 54(10), 3118–3132.
https://doi.org/10.1080/00207543.2015.1115909
Gebhardt, A., & Hötter, J.-S. (2016). Additive Manufacturing: 3D Printing for Prototyping and Manufacturing. In Hanser (Vol. 35, Issue 3).
http://search.ebscohost.com/login.aspx?direct=true&db=bwh&AN=96225499&la ng=pt-br&site=ehost-live
Gerber, G., & Barnard, L. (2008). Designing for laser sintering. Journal for New Generation Sciences, 6(2), 47–59.
Gibson, I., Rosen, D., & Stucker, B. (2015). Material Jetting BT - Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing (I.
Gibson, D. Rosen, & B. Stucker (eds.); pp. 175–203). Springer New York.
https://doi.org/10.1007/978-1-4939-2113-3_7
Goepel, K. D. (2018a). Implementation of an Online Software Tool for the Analytic Hierarchy Process (AHP-OS). International Journal of the Analytic Hierarchy Process, 10(3), 469–487. https://doi.org/10.13033/ijahp.v10i3.590
Goepel, K. D. (2018b). Implementation of an Online Software Tool for the Analytic Hierarchy Process (AHP-OS). International Journal of the Analytic Hierarchy Process, 10(3), 469–487. https://doi.org/10.13033/ijahp.v10i3.590
Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018).
Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: A review and future perspectives. Materials, 11(5). https://doi.org/10.3390/ma11050840
Gornet, T. T. W. (2017). History of Additive Manufacturing (pp. 1–24).
https://doi.org/10.4018/978-1-5225-2289-8.ch001
Groover, M., & Zimmers, E. (1983). CAD/CAM: computer-aided design and manufacturing. Pearson Education.
Haarburger, P., Roschkowski, M., & Manglani, V. (2019). Formnext and Wohlers Associates bring together investors and additive manufacturing.
https://wohlersassociates.com/investor-dinner.html
Hague, R., Mansour, S., & Saleh, N. (2004). Material and design considerations for Rapid Manufacturing. International Journal of Production Research, 42(22), 4691–4708.
https://doi.org/10.1080/00207840410001733940
Hällgren, S., Pejryd, L., & Ekengren, J. (2016). 3D data export for Additive Manufacturing - improving geometric accuracy. Procedia CIRP, 50, 518–523.
https://doi.org/10.1016/j.procir.2016.05.046
Hamri, O., Léon, J. C., Giannini, F., & Falcidieno, B. (2010). Computer aided design and finite element simulation consistency. Strojniski Vestnik/Journal of Mechanical Engineering, 56(11), 728–743. https://doi.org/10.5545/153_DOI_not_assigned Han, S. C., Lee, J. W., & Kang, K. (2015). A New Type of Low Density Material: Shellular.
Advanced Materials, 27(37), 5506–5511.
https://doi.org/10.1002/adma.201501546
Hauser, J. R., & Clausings, D. (1996). The house of quality. Harvard Business Review.
https://hbr.org/1988/05/the-house-of-quality
Huang, T., Mao, G., Jiang, G., & Zhou, W. (2000). Two dimensional coupled flow-thermal-structural numerical simulation. Acta Aerodynamica Sinica, 18(1), 115–119.
Hull, C. W. (1984). United States Patent (19) Hull (54) (75) (73) 21) 22 (51) 52) (58) (56) APPARATUS FOR PRODUCTION OF THREE-DMENSONAL OBJECTS BY STEREO THOGRAPHY.
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013). Advanced lattice support structures for metal additive manufacturing. Journal of Materials Processing Technology, 213(7), 1019–1026. https://doi.org/10.1016/j.jmatprotec.2013.01.020 Ida, G., & Jean-Baptiste, F. (2012). Design for Six Sigma and lean product development.
International Journal of Lean Six Sigma, 3(1), 45–58.
https://doi.org/10.1108/20401461211223722
Inc., W. A. (2020). SME Announces Insights on Additive Manufacturing for Investors by
Wohlers Associates at RAPID + TCT 2020.
https://wohlersassociates.com/press81.html
ISO/ASTM-52900. (2017). Additive manufacturing - General principles - Terminology (ISO/ASTM 52900:2015). https://www.iso.org/obp/ui/#iso:std:iso-astm:52900:dis:ed-2:v1:en
Jayathirtha, R. A. (2013). Barriers for implementation of Six Sigma by Small and Medium Enterprises *. International Journal of Advancements in Research & Technology, 2.
Jenab, K., Wu, C., & Moslehpour, S. (2018). Design for six sigma: A review. Management Science Letters, 8(1), 1–18. https://doi.org/10.5267/j.msl.2017.11.001
Jiang, J., & Xu, X. (2018). Support Structures for Additive Manufacturing : A Review.
https://doi.org/10.3390/jmmp2040064
John, B., Senthilkumar, P., & Sadasivan, S. (2019a). Applied and Theoretical Aspects of Conjugate Heat Transfer Analysis: A Review. Archives of Computational Methods in Engineering, 26(2), 475–489. https://doi.org/10.1007/s11831-018-9252-9
John, B., Senthilkumar, P., & Sadasivan, S. (2019b). Applied and Theoretical Aspects of Conjugate Heat Transfer Analysis: A Review. Archives of Computational Methods in Engineering, 26(2), 475–489. https://doi.org/10.1007/s11831-018-9252-9
Joo, Y., Lee, I., & Kim, S. J. (2018). Efficient three-dimensional topology optimization of heat sinks in natural convection using the shape-dependent convection model.
International Journal of Heat and Mass Transfer, 127, 32–40.
https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.009
Kamal, M., & Rizza, G. (2019). Design for metal additive manufacturing for aerospace applications. In Additive Manufacturing for the Aerospace Industry. Elsevier Inc.
https://doi.org/10.1016/b978-0-12-814062-8.00005-4
Kamps, T., Gralow, M., Schlick, G., & Reinhart, G. (2017a). Systematic Biomimetic Part Design for Additive Manufacturing. Procedia CIRP, 65, 259–266.
https://doi.org/10.1016/j.procir.2017.04.054
Kamps, T., Gralow, M., Schlick, G., & Reinhart, G. (2017b). Systematic Biomimetic Part
Design for Additive Manufacturing. Procedia CIRP, 65, 259–266.
https://doi.org/10.1016/j.procir.2017.04.054
Kassem, R., Ajmal, M., Hussain, M., & Helo, P. (2017). Critical factors for culture of judicial excellence: benchmarking study of Emirati courts. Critical Factors for Culture of Judicial Excellence, 24. https://doi.org/10.1108/BIJ-03-2016-0045
Khwanruthai, B. (2012). How to do AHP analysis in Excel.
Klahn, C., Leutenecker, B., & Meboldt, M. (2015). Design strategies for the process of additive manufacturing. Procedia CIRP, 36, 230–235.
https://doi.org/10.1016/j.procir.2015.01.082
Klein, F. (1921). Gesammelte mathematische Abhandlungen (Vol. 1). J. Springer.
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018). Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing : A critical review. Materials & Design, 139, 565–586.
https://doi.org/10.1016/j.matdes.2017.11.021
Kranz, J., Herzog, D., & Emmelmann, C. (2015). Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. Journal of Laser Applications, 27(S1), S14001. https://doi.org/10.2351/1.4885235
Kumar Sharma, R., & Gopal Sharma, R. (2014). Integrating six sigma culture and TPM framework to improve manufacturing performance in SMEs. Quality and Reliability Engineering International, 30(5), 745–765. https://doi.org/10.1002/qre.1525 Kumbhar, N. N., & Mulay, A. V. (2018). Post Processing Methods used to Improve Surface
Finish of Products which are Manufactured by Additive Manufacturing Technologies:
A Review. Journal of The Institution of Engineers (India): Series C, 99(4), 481–487.
https://doi.org/10.1007/s40032-016-0340-z
Kumke, M., Watschke, H., & Vietor, T. (2016a). A new methodological framework for design for additive manufacturing. Virtual and Physical Prototyping, 11(1), 3–19.
https://doi.org/10.1080/17452759.2016.1139377
Kumke, M., Watschke, H., & Vietor, T. (2016b). A new methodological framework for design for additive manufacturing. Virtual and Physical Prototyping, 11(1), 3–19.
https://doi.org/10.1080/17452759.2016.1139377
Langelaar, M. (2016). Topology optimization of 3D self-supporting structures for additive manufacturing. Additive Manufacturing, 12, 60–70.
https://doi.org/10.1016/j.addma.2016.06.010
Laverne, F., Segonds, F., Anwer, N., & Le Coq, M. (2014). Engineering Education View project Reference fitting algorithms for aspheric and freeform surfaces (15SIB01:
FreeFORM) View project Frederic Segonds Ecole Nationale Supérieure d’Arts et Métiers DFAM IN THE DESIGN PROCESS: A PROPOSAL OF CLASSIFICATION TO
FOSTER EARLY DESIGN STAGES.
https://www.researchgate.net/publication/277131995
Laverne, F., Segonds, F., Anwer, N., & Le Coq, M. (2015). Assembly based methods to support product innovation in design for additive manufacturing: An exploratory case study. Journal of Mechanical Design, Transactions of the ASME, 137(12).
https://doi.org/10.1115/1.4031589
Li, W., Yang, L., Ren, J., & Jiang, H. (2016). Effect of thermal boundary conditions and thermal conductivity on conjugate heat transfer performance in pin fin arrays.
International Journal of Heat and Mass Transfer, 95, 579–592.
https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.010
Liao, Y., Deschamps, F., Loures, E. de F. R., & Ramos, L. F. P. (2017). Past, present and future of Industry 4.0 - a systematic literature review and research agenda proposal.
In International Journal of Production Research (Vol. 55, Issue 12, pp. 3609–3629).
Taylor & Francis. https://doi.org/10.1080/00207543.2017.1308576
Lindwall, A., Dordlofva, C., & Öhrwall Rönnbäck, A. (2017). ADDITIVE MANUFACTURING AND THE PRODUCT DEVELOPMENT PROCESS : INSIGHTS FROM THE SPACE.
International Conference on Engineering Design (ICED17), 5(August), 345–354.
Ma, Y. (2005). A case study on non-parametric design method in ODM collaborative product development. International Journal of Product Development, 2(4), 411.
https://doi.org/10.1504/IJPD.2005.008228
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M.
(2019a). SLM lattice structures: Properties, performance, applications and
challenges. Materials and Design, 183, 108137.
https://doi.org/10.1016/j.matdes.2019.108137
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M.
(2019b). SLM lattice structures: Properties, performance, applications and
challenges. Materials and Design, 183, 108137.
https://doi.org/10.1016/j.matdes.2019.108137
Mader, D. P. (2003). DFSS and Your Current Design Process. www.asq.org
Mader, D. P. (2008). LEAN SIX SIGMA ’ S EVOLUTION. 40.
https://faculty.mercer.edu/burtner_j/documents/QualityArticleLeanSixSigmaQuali tyProgress2008.pdf
Magnacad LLC. (2017). Not all Design Methologies are created equal.
https://magnacad.com/wp-content/uploads/2017/04/17MKT-ICWP-1.pdf
Maidin, S. Bin, Campbell, I., & Pei, E. (2012). Development of a design feature database to support design for additive manufacturing. Assembly Automation, 32(3), 235–
244. https://doi.org/10.1108/01445151211244375
Mark, S., Lewis, P., & Thornhill, A. (2007). Research Method for Business Student, 4th edition.
Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S.,
& Gisario, A. (2019). The Potential of Additive Manufacturing in the Smart. Applied Science, 34.
Mohr, J. J., Sengupta, S., & Slater, S. F. (2010). Marketing of high-technology products and innovations. Pearson Prentice Hall.
Morski, I. (2016). Additive manufacturing and the talent gap | Deloitte University Press.
https://www2.deloitte.com/us/en/insights/focus/3d-opportunity/3d-printing-talent-gap-workforce-development.html#
Munro, R. (2015). The certified six sigma green belt handbook (Second Edition).
Nagesha, B. K., Dhinakaran, V., Varsha Shree, M., Manoj Kumar, K. P., Chalawadi, D., &
Sathish, T. (2020). Review on characterization and impacts of the lattice structure in additive manufacturing. Materials Today: Proceedings, 21, 916–919.
https://doi.org/10.1016/j.matpr.2019.08.158
Nicolas Huc. (2014). Conjugate Heat Transfer | COMSOL Blog.
https://www.comsol.com/blogs/conjugate-heat-transfer/
Nowak, G., & Wróblewski, W. (2011). Optimization of blade cooling system with use of conjugate heat transfer approach. International Journal of Thermal Sciences, 50(9), 1770–1781. https://doi.org/10.1016/j.ijthermalsci.2011.04.001
Payne, B. A., & Toga, A. W. (1992). Distance field manipulation of surface models. IEEE Computer Graphics and Applications, 12(1), 65–71.
https://doi.org/10.1109/38.135885
Pixelrust. (2012). 3d printed gyroid | Detail of a gyroid I bought via Shapeway… | Flickr.
https://www.flickr.com/photos/pixelrust/7164440625
Ponche, R., Kerbrat, O., Mognol, P., & Hascoet, J. Y. (2014a). A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process.
Robotics and Computer-Integrated Manufacturing, 30(4), 389–398.
https://doi.org/10.1016/j.rcim.2013.12.001
Ponche, R., Kerbrat, O., Mognol, P., & Hascoet, J. Y. (2014b). A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process.
Robotics and Computer-Integrated Manufacturing, 30(4), 389–398.
https://doi.org/10.1016/j.rcim.2013.12.001
Pradel, P., Zhu, Z., Bibb, R., & Moultrie, J. (2018a). Investigation of design for additive manufacturing in professional design practice. Journal of Engineering Design, 29(4–
5), 165–200. https://doi.org/10.1080/09544828.2018.1454589
Pradel, P., Zhu, Z., Bibb, R., & Moultrie, J. (2018b). Investigation of design for additive manufacturing in professional design practice. Journal of Engineering Design, 29(4–
5), 165–200. https://doi.org/10.1080/09544828.2018.1454589 Ramalingam, S. (2008). Mass Efficiency in Mechanical Design. II.
Ranta, M., Inui, M., Kimura, F., & Mantyla, M. (1993). Cut and paste based modeling with boundary features. Proceedings on the Second ACM Symposium on Solid Modeling and Applications - SMA ’93, 303–312. https://doi.org/10.1145/164360.164452 Redwood, B., Schffer, F., & Garret, B. (2017). The 3D printing handbook: technologies,
design and applications. 3D Hubs.
Rias, A., Bouchard, C., Segonds, F., Vayre, B., & Abed, S. (2016). DESIGN FOR ADDITIVE
MANUFACTURING: A CREATIVE APPROACH. INTERNATIONAL DESIGN CONFERENCE - DESIGN 2016. https://doi.org/10.1007/978-3-319-53195-3_8
Rodrigue, H., & Rivette, M. (2010a). An Assembly-Level Design for Additive Manufacturing Methodology. IDMME - Virtual Concept, 1–9.
https://doi.org/10.1007/978-2-8178-0169-8
Rodrigue, H., & Rivette, M. (2010b). An Assembly-Level Design for Additive Manufacturing Methodology. IDMME - Virtual Concept, 1–9.
https://doi.org/10.1007/978-2-8178-0169-8
Rosen, D., Johnston, S., & Reed, M. (2006a). Design of General Lattice Structures for Lightweight and Compliance Applications. Rapid Manufacturing Conference, 1–14.
http://smartech.gatech.edu/handle/1853/33037
Rosen, D., Johnston, S., & Reed, M. (2006b). Design of General Lattice Structures for Lightweight and Compliance Applications. Rapid Manufacturing Conference, 1–14.
Rosen, D. W. (2007). Design for additive manufacturing: A method to explore unexplored regions of the design space. 18th Solid Freeform Fabrication Symposium, SFF 2007, 402–415.
Rosen, D. W. (2016). What are principles for design for additive manufacturing?
Proceedings of the International Conference on Progress in Additive Manufacturing, Part F1290, 85–90. https://doi.org/10.3850/978-981-09-0446-3_027
Salonitis, K. (2016). Design for additive manufacturing based on the axiomatic design method. International Journal of Advanced Manufacturing Technology, 87(1–4), 989–996. https://doi.org/10.1007/s00170-016-8540-5
Salonitis, K., & Zarban, S. Al. (2015). Redesign optimization for manufacturing using additive layer techniques. Procedia CIRP, 36, 193–198.
https://doi.org/10.1016/j.procir.2015.01.058
Saunders, M. (2017). DfAM strategy - create ’ design space ’ for maximum AM impact.
44(0), 1–3. https://www.renishaw.com/en/dfam-strategy-create-design-space-for-maximum-am-impact--43420
Schmelzle, J., Kline, E. V., Dickman, C. J., Reutzel, E. W., Jones, G., & Simpson, T. W. (2015).
(Re)Designing for Part Consolidation: Understanding the Challenges of Metal
Additive Manufacturing. Journal of Mechanical Design, Transactions of the ASME, 137(11), 1–12. https://doi.org/10.1115/1.4031156
Seepersad, C. C. (2014). Challenges and Opportunities in Design for Additive Manufacturing. 3D Printing and Additive Manufacturing, 1(1), 10–13.
https://doi.org/10.1089/3dp.2013.0006
Seepersad, C. C., Govett, T., Kim, K., Lundin, M., & Pinero, D. (2012). A designer’s guide for dimensioning and tolerancing SLS parts. 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012, 921–931.
Shah, R. K. (2008a). EXTENDED SURFACE HEAT TRANSFER. A-to-Z Guide to Thermodynamics, Heat and Mass Transfer, and Fluids Engineering; Begellhouse.
https://doi.org/10.1615/atoz.e.extended_surface_heat_transfer
Shah, R. K. (2008b). EXTENDED SURFACE HEAT TRANSFER. A-to-Z Guide to Thermodynamics, Heat and Mass Transfer, and Fluids Engineering; Begellhouse.
https://doi.org/10.1615/atoz.e.extended_surface_heat_transfer
Sidebotham, G. (2015). Heat Transfer Modeling. In Heat Transfer Modeling.
https://doi.org/10.1007/978-3-319-14514-3
Siemens NX. (2019). Introducing Lattice in NX.
https://community.sw.siemens.com/s/article/introducing-lattice-in-nx
Silverman, D. (2013). Doing qualitative research: A practical handbook. SAGE publications limited.
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013a). A new approach to the design and optimisation of support structures in additive manufacturing. The International Journal of Advanced Manufacturing Technology, 66(9–12), 1247–1254.
https://doi.org/10.1007/s00170-012-4403-x
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013b). A new approach to the design and optimisation of support structures in additive manufacturing. The International Journal of Advanced Manufacturing Technology, 66(9–12), 1247–1254.
https://doi.org/10.1007/s00170-012-4403-x
Sutherland, I. E. (1964). Sketchpad a Man-Machine Graphical Communication System.
SIMULATION, 2(5), R-3-R-20. https://doi.org/10.1177/003754976400200514 Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., Elmadih, W., & Leach, R. (2018a). Design
and analysis of strut-based lattice structures for vibration isolation. Precision
Engineering, 52(May 2017), 494–506.
https://doi.org/10.1016/j.precisioneng.2017.09.010
Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., Elmadih, W., & Leach, R. (2018b). Design and analysis of strut-based lattice structures for vibration isolation. Precision
Engineering, 52(May 2017), 494–506.
https://doi.org/10.1016/j.precisioneng.2017.09.010
Taha, A. (2015). K3DSurf : 3d surface generator. http://k3dsurf.sourceforge.net/
Taufik, M., & Jain, P. K. (2014). Role of build orientation in layered manufacturing : A
Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K., & Arafat, H. (2018).
3D printed triply periodic minimal surfaces as spacers for enhanced heat and mass transfer in membrane distillation. Desalination, 443(May), 256–271.
https://doi.org/10.1016/j.desal.2018.06.009
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., &
Charitidis, C. (2018). Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Materials Today, 21(1), 22–37.
https://doi.org/10.1016/j.mattod.2017.07.001
Turner, B. N., Strong, R., & Gold, S. A. (2014). A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyping Journal, 20(3), 192–204. https://doi.org/10.1108/RPJ-01-2013-0012
Valjak, F., & Bojčetić, N. (2019). Conception of design principles for additive manufacturing. Proceedings of the International Conference on Engineering Design, ICED, 2019-Augus(AUGUST), 689–698. https://doi.org/10.1017/dsi.2019.73
Vayre, B., Vignat, F., & Villeneuve, F. (2012). Designing for additive manufacturing.
Procedia CIRP, 3(1), 632–637. https://doi.org/10.1016/j.procir.2012.07.108
Wilkes, M. V. (1990). Computing perspectives: it’s software now. Communications of the ACM, 33(10), 19–21. https://doi.org/10.1145/84537.84539
Wohlers, T. (2005). Wohlers report 2005, rapid prototyping, tooling and manufacturing:
state of the industry. Annual Worldwide Progress Report, 342.
Wu, M. W., & Lai, P. H. (2016). The positive effect of hot isostatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti-6Al-4V alloy. Materials Science and Engineering A, 658, 429–438.
https://doi.org/10.1016/j.msea.2016.02.023
https://doi.org/10.1016/j.msea.2016.02.023