• Ei tuloksia

Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams

N/A
N/A
Info
Lataa
Protected

Academic year: 2022

Jaa "Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams"

Copied!
20
0
0

Ladataan.... (näytä koko teksti nyt)

Lataa nyt ( 20 sivua )

Kokoteksti

(1)

This is a version of a publication

in

Please cite the publication as follows:

DOI:

Copyright of the original publication:

This is a parallel published version of an original publication.

This version can differ from the original published article.

published by

Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams

Munir Qaisar, Peltonen Riku, Kärki Timo

Munir, Q., Peltonen, R., Kärki, T. (2021). Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams. Materials, vol. 14, issue 16. DOI:

10.3390/ma14164758

Publisher's version MDPI

Materials

10.3390/ma14164758

© 2021 by the authors.

(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)

Viittaukset

Lataa nyt ( PDF - 20 sivua - 25.46 MB )

LIITTYVÄT TIEDOSTOT

Basics of screen printing for printable and flexible electronics

Writers Tomi Tuomaala, Teija Tuhkala, Miia Törmänen, Harri Määttä Director, camera, editor Antero Lehtonen Director, subtitles: Anne Peltola Producers Design Inspis &

Ihminen – robotti järjestelmän turvallisuuden arviointiprosessi Timo Malm Tapio Heikkilä * Jari M Ahola *

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robot systems and integration.. Robots and robotic devices — Safety requirements for Industrial robots

Best practice guidelines on logistics and quality assurance for pellet production

Due to an increasing demand and competition for raw materials for the production of pellets, particularly for side products from the forest industries, solutions providing

Potential of neglected biomass and industrial side- streams utilization in biofuels production

This study aimed to estimate potential biofuel production from eutrophic (EL) and mesotrophic (ML) lake bottom biomass and the manufacturing side-streams from the pulp and

3D-tulostaminen ja sen mahdollisuudet hammaslääketieteessä

Kuten artikkelissa “3D printing in dentistry” (Dawood et al., 2015) mainitaan, 3D- tulostamisteknologialla on vastavuoroisuutta hammaslääketieteen ja lääketieteen

Hole-Transporting Materials for Printable Perovskite Solar Cells

4-Tert-butylpyridine Free Organic Hole Transporting Materials for Stable and Efficient Planar Perovskite Solar Cells.. Branched methoxydiphenylamine-substituted fluorene derivatives

Artificial Intelligence in 3D Printing : Real-time 3D printing control

Keywords: Artificial Intelligence, Additive Manufacturing, Stereo- lithography, Photopolymerization, Machine Learning, Real- time 3D printing control, Ajatec company..

Dispenser system for nanocellulose 3D printing

The stepper motor controlled 10ml (brand) dispenser syringe was filled with 1.96 wt-% aqueous dispersion of CNF (obtained from Aalto University, Finland). CNF fabrication has