• Ei tuloksia

(1)AS-84.3134 Energiatekniikan automaatio Tentti

N/A
N/A
Info
Lataa
Protected

Academic year: 2022

Jaa "(1)AS-84.3134 Energiatekniikan automaatio Tentti "

Copied!
1
0
0

Kokoteksti

(1)

AS-84.3134 Energiatekniikan automaatio Tentti 18.12.2009

1. Selosta mihin APROS-ohjelmistoa voidaan käyttää. Kerro todellisista käyttöesimerkeistä.

Kuvaile fysikaalisten ilmiöiden mallinnustarkkuutta.

2. Esitä kuvien avulla voimalaitoksen tehon säädön kaksi perusratkaisua. Kumpi niistä vastaa nopeammin tehontarpeen muutokseen?

3. Selosta malliprediktiivisen säädön periaate ja esitä jokin hyväksi havaittu tutkittu voimalaitossovellutus.

4. Mitkä ovat kolme yksinkertaista periaatetta, joiden avulla maakaasuverkoston toimintaa on perinteisesti optimoitu? Hahmottele tyypillinen kompressorin toimintaikkuna. Merkitse myös koordinaatiston akselien suureet.

5. Selosta kiinteäoksidipolttokennon (SOFC Solid Oxide Fuel Cell) ohjausjärjestelmän komponentit sekä ohjauksen ja säädön pääperiaatteet. Mitä eroja Solid Oxide ja Proton Exchange Membrane polttokennoilla on lämpötilan, polttoaineen ja käynnistämisen suhteen?

Viittaukset

LIITTYVÄT TIEDOSTOT

Muhammad Safdar: Manganese Oxide Based Catalytic Micromotors: Synthesis, Characterization and Applications 142... Manganese Oxide Based

3.3.1 Interaction of graphene oxide and reduced graphene oxide with serum proteins 21 3.4 Bioaccumulation of graphene-based nanomaterials

While the amount of impurities in the films deposited using this chemistry can be minimized by performing film deposition at low temperatures, other ALD cobalt oxide chemistries,

Multicomponent oxide thin films can be prepared in a well-controlled way as long as the same principle that makes binary oxide ALD work so well is followed for each

In a study of Maslekar patient-controlled nitrous oxide inhalation (Entonox - 50 % nitrous oxide and 50 % oxygen) was compared with patient-maintained target- controlled infusion

A high performance composite cathode with enhanced CO2 resistance for low and intermediate- temperature solid oxide fuel cells. Degradation of solid oxide fuel cell

Sample properties (average ± standard deviation) measured from four replicate dung samples.. HONO emissions were five times and NO emissions 60 times higher in one year old sample

Different kinds of materials have been studied for their P retention properties (O’Connor et al. 2005), but those containing Ca, Al, or Fe in soluble or solid oxide forms have